NTISthis.com

Evidence Guide: AURVTN029 - Set up and operate universal vehicle measuring systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTN029 - Set up and operate universal vehicle measuring systems

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to set up and operate universal measuring system

  1. Job requirements are determined from workplace instructions
  2. Set-up information is accessed and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Measuring equipment is selected, set up, and calibrated and checked for serviceability
  5. Work is planned to complete job requirements efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set-up information is accessed and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measuring equipment is selected, set up, and calibrated and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to complete job requirements efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out measurement activities

  1. Measuring system is secured and adjusted to vehicle according to original equipment manufacturer (OEM) or authorised agency’s recommended procedures and safety requirements
  2. Vehicle is measured in three dimensions according to OEM or authorised agency’s requirements and workplace procedures, and without causing damage to vehicle system or components
  3. Pre- and post-repair measurements are recorded according to workplace procedures
Measuring system is secured and adjusted to vehicle according to original equipment manufacturer (OEM) or authorised agency’s recommended procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is measured in three dimensions according to OEM or authorised agency’s requirements and workplace procedures, and without causing damage to vehicle system or components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Pre- and post-repair measurements are recorded according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete measurement processes

  1. Final checks are made to ensure measurements are accurate, meet workplace expectations, and comply with OEM or authorised agency’s specifications
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Measuring equipment is checked and maintained according to manufacturer specifications, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final checks are made to ensure measurements are accurate, meet workplace expectations, and comply with OEM or authorised agency’s specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measuring equipment is checked and maintained according to manufacturer specifications, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to set up and operate universal measuring system

  1. Job requirements are determined from workplace instructions
  2. Set-up information is accessed and interpreted
  3. Hazards associated with the work are identified and risks are managed
  4. Measuring equipment is selected, set up, and calibrated and checked for serviceability
  5. Work is planned to complete job requirements efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set-up information is accessed and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measuring equipment is selected, set up, and calibrated and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to complete job requirements efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out measurement activities

  1. Measuring system is secured and adjusted to vehicle according to original equipment manufacturer (OEM) or authorised agency’s recommended procedures and safety requirements
  2. Vehicle is measured in three dimensions according to OEM or authorised agency’s requirements and workplace procedures, and without causing damage to vehicle system or components
  3. Pre- and post-repair measurements are recorded according to workplace procedures
Measuring system is secured and adjusted to vehicle according to original equipment manufacturer (OEM) or authorised agency’s recommended procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is measured in three dimensions according to OEM or authorised agency’s requirements and workplace procedures, and without causing damage to vehicle system or components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Pre- and post-repair measurements are recorded according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete measurement processes

  1. Final checks are made to ensure measurements are accurate, meet workplace expectations, and comply with OEM or authorised agency’s specifications
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Measuring equipment is checked and maintained according to manufacturer specifications, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final checks are made to ensure measurements are accurate, meet workplace expectations, and comply with OEM or authorised agency’s specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measuring equipment is checked and maintained according to manufacturer specifications, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to set up and operate universal measuring system

1.1 Job requirements are determined from workplace instructions

1.2 Set-up information is accessed and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Measuring equipment is selected, set up, and calibrated and checked for serviceability

1.5 Work is planned to complete job requirements efficiently

2. Carry out measurement activities

2.1 Measuring system is secured and adjusted to vehicle according to original equipment manufacturer (OEM) or authorised agency’s recommended procedures and safety requirements

2.2 Vehicle is measured in three dimensions according to OEM or authorised agency’s requirements and workplace procedures, and without causing damage to vehicle system or components

2.3 Pre- and post-repair measurements are recorded according to workplace procedures

3. Complete measurement processes

3.1 Final checks are made to ensure measurements are accurate, meet workplace expectations, and comply with OEM or authorised agency’s specifications

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Measuring equipment is checked and maintained according to manufacturer specifications, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to set up and operate universal measuring system

1.1 Job requirements are determined from workplace instructions

1.2 Set-up information is accessed and interpreted

1.3 Hazards associated with the work are identified and risks are managed

1.4 Measuring equipment is selected, set up, and calibrated and checked for serviceability

1.5 Work is planned to complete job requirements efficiently

2. Carry out measurement activities

2.1 Measuring system is secured and adjusted to vehicle according to original equipment manufacturer (OEM) or authorised agency’s recommended procedures and safety requirements

2.2 Vehicle is measured in three dimensions according to OEM or authorised agency’s requirements and workplace procedures, and without causing damage to vehicle system or components

2.3 Pre- and post-repair measurements are recorded according to workplace procedures

3. Complete measurement processes

3.1 Final checks are made to ensure measurements are accurate, meet workplace expectations, and comply with OEM or authorised agency’s specifications

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Measuring equipment is checked and maintained according to manufacturer specifications, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

set up and operate a universal measuring system on two occasions to take three-dimensional measurements (length, width and height) of upper and underbody on two vehicles with different types of chassis, including checking for the following types of damage:

diamond

twist

kick-up and kick-down.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to setting up and operating universal vehicle measuring systems, including procedures for:

following universal measuring equipment safety requirements

selecting and using personal protective equipment (PPE)

manual handling techniques

vehicle designs, including:

mono chassis

space frame

types of vehicle chassis misalignment damage, including:

diamond

twist

kick-up and kick-down

sag

mash and sway damage

original equipment manufacturer (OEM) or authorised agency’s specifications, including pre- and post-repair measurement intervals

procedures for final inspection of set-up and operation of a universal measuring system.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Set-up information must include:

workplace procedures

measuring equipment information

OEM or authorised agency vehicle chassis specifications.

Measuring equipment must include:

universal measuring system

hand tools and equipment.

Set up must comply with:

recommended workplace procedures

specifications of OEM or authorised agency

vehicle specifications.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

following universal measuring equipment safety requirements

selecting and using personal protective equipment (PPE)

manual handling techniques.

Three dimensions of measurement must include:

length

height

width.